When should a Care home review its water safety risk assessment?

When should a Care home review its water safety risk assessment?

Care homes are naturally busy environments. Residents’ needs change, rooms are refurbished, bathrooms are adapted, extensions are added and parts of a building can become temporarily or permanently unused. Even changes that seem relatively small can affect how a water system operates.

So, when should a Care home review its water safety risk assessment?

It’s an important question because water safety arrangements need to reflect the building and water system as they are today, not how they were when the original risk assessment or written scheme was produced.

What can change in a care home?

There are many reasons why the way water moves through and is used within a care home can change.

For example:

  • A bathroom may be refurbished or redesigned.
  • New outlets may be installed.
  • A bedroom wing may be closed while work takes place.
  • An extension or new area may be added.
  • Pipework may be altered during maintenance or refurbishment.
  • A number of bedrooms may become vacant.
  • The use of a room or area may change.
  • A new piece of equipment may be connected to the water system.
  • Occupancy patterns may change over time.

Each of these changes can have implications for the water system. For example, alterations to pipework or the addition of outlets can affect flow and circulation, while changes in occupancy can mean some outlets are used much less frequently.

HSE guidance highlights that risk assessments should be reviewed where there is a change to the water system or its use, or where the use of the building changes.

Why do changes matter?

Legionella risk is influenced by a combination of factors within a water system. These include temperature, stagnation, water storage and circulation, system design and the presence of deposits that can support bacterial growth.

When a building changes, one or more of these factors can change too.

For instance, imagine a care home refurbishes a number of en-suite bathrooms. The work may improve the facilities for residents, but it could also alter sections of the pipework or introduce new outlets.

Similarly, if a previously occupied bedroom becomes vacant, the associated shower, basin or toilet may be used much less frequently. That change in usage needs to be considered as part of the home’s wider water safety arrangements.

The change itself doesn’t automatically mean there is a water safety problem, however it is an opportunity to stop, review what has changed and consider whether your existing controls still work effectively.

Has your water safety documentation caught up?

One of the simplest questions to ask after a significant change is:

Does our documentation still describe the building and water system we have today?

Your risk assessment should provide an accurate understanding of the system, including its layout, potential sources of risk and the controls in place. HSE guidance also recommends that risk assessments include an up-to-date description or schematic of the water system and arrangements for reviewing the assessment when circumstances change.

If your care home has undergone refurbishment, added new outlets or changed how areas are used, it’s worth checking whether:

  • Your risk assessment still reflects the current building.
  • Your schematic accurately represents the water system.
  • New outlets or equipment have been included.
  • Little-used areas have been identified.
  • Flushing arrangements still reflect how the building is being used.
  • Temperature monitoring continues to provide appropriate coverage.
  • Any changes have affected existing control measures.
  • Responsibilities remain clear.

This doesn’t mean starting again from scratch. The appropriate response depends on what has changed and the findings of your assessment.

What about temporary changes?

It’s also important not to overlook changes that aren’t permanent.

A care home might temporarily close a bedroom while it is being refurbished, take a bathroom out of use, close part of a building or have lower occupancy for a period of time.

Although these changes may only last a few weeks or months, they can still affect water usage.

HSE guidance specifically highlights infrequently used outlets and areas of stagnation as factors that can support microbial growth.

That’s why temporary changes should still be considered. If an outlet is no longer being used in the same way, your existing arrangements may need to take that into account.

Think about the people using the building too

In a care setting, understanding the building is only part of the picture. You also need to consider the people who rely on it.

HSE guidance identifies care homes as settings where particular consideration is needed because residents may be at higher risk of infection. Risk assessments should therefore consider both Legionella and scalding risks and the susceptibility of the people who may be exposed.

A change in the resident population, for example, may therefore be another reason to review whether your existing arrangements remain appropriate.

Again, this isn’t about assuming that a change creates a problem. It’s about making sure the water safety approach remains proportionate to the circumstances of the care home.

Don’t wait for the next scheduled review

A common misconception is that water safety only needs to be reviewed at a fixed interval.

In reality, HSE guidance says risk assessments should be reviewed regularly and particularly when there is reason to suspect they are no longer valid. Examples include changes to the water system or its use, changes to the building’s use, changes in personnel and evidence that existing control measures are no longer effective.

That means a significant change to your care home shouldn’t simply be noted and left until the next routine review.

Instead, use the change as an opportunity to ask:

  • What has changed?
  • Could it affect the water system?
  • Do our existing controls still work?
  • Does our documentation reflect the current situation?
  • Do we need to do anything differently?
A changing care home needs a responsive water safety plan

Care homes evolve. Occupancy changes, facilities are improved and buildings are adapted to meet residents’ needs. Your water safety arrangements need to keep pace.

At Nant, we help care providers understand their water systems, identify changes that could affect risk and put practical controls in place. Where changes occur, our team can help customers review the wider picture and understand whether their existing arrangements remain appropriate.

A few questions to ask when your care home changes

If you’re planning refurbishment, maintenance or changes to how your building is used, consider:

  • What has changed within the building or water system?
  • Are any outlets now being used less frequently?
  • Has any pipework, equipment or outlet configuration changed?
  • Are our existing temperature controls still effective?
  • Does our risk assessment and system schematic reflect the current building?
  • Has the way residents use the building changed?
  • Do our existing control measures still reflect the current situation?

If you’re unsure, get in touch and we can help you understand what the change means and whether further action is needed.